instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
(Al2O3) and thorium (ThO2) in the ceramic 0.05 (mm) or less resistance of the platinum coil The structure of putting
Platinum resistance and bleeding in the constant current Road heat devices degree 200-300. When the combustible gas contact with this by action of the catalyst, Measure the increase the resistance of Pt Resistance wire by heat up university’s temperature
temperature, 10% of the water is decomposed and the remaining 90% can be recycled. To reduce the temperature, other processes for hightemperature splitting of water have been suggested:
▸Thermo-chemical cycles.
▸Hybrid systems coupling thermal decomposition and electrolytic decomposition.
▸Direct catalytic decomposition of water with separation via a ceramic
Figure 13 shows that cryo pump is cooling pump. It means this pump is cooling, liquefaction and store air, not pumping. Generally, it has 3 processes like condensation, absorption and trap at low temperature. The cooled air or molecules do not have any momentum so it is no possibility to heat any molecules. It means vacuum.
Cryo pump have High emission velocity and high emission capacity so it
and society meet a range of energy and environmental challenges.
One example can be found in the area of water use and purification, where GE scientists are investigating new membrane materials and innovative advanced separation technologies. These allow for further treatment and better performance of on-site wastewater reuse and recycling for the industrial, agriculture and municipal sectors.